Light Steel Villa Structure

Light steel villa floor by the cold-formed thin-walled steel frame or composite beam, Light Steel Villa floor OSB structural board, support, connectors and other components. Light Steel Villa The materials used are oriented particleboard, cement fiberboard, and plywood. On these light floors can withstand 316 to 365 kg per square meter of load. Light steel villa floor structure system weighs only one quarter to one sixth of the traditional concrete floor system, Light Steel Villa but its floor height will be 100 to 120 millimeters higher than ordinary concrete slab.

Light steel villa roofing system is composed of roof trusses, Light Steel Villa structural OSB panels, waterproofing floors, light roof tiles (metal or pitch tiles). Light steel structure of the roof, Light Steel Villa the appearance can have a variety of combinations. Light Steel Villa There are many kinds of materials. In the protection of the waterproof technology under the premise of the appearance of a lot of options.

The structure of the wall of the lighthouse

Light steel villa wall mainly by the wall column, wall beam, wall beam, wall support, Light Steel Villa wall panels and connectors. Light steel villas generally use the inner wall as the structure of the load-bearing walls, the wall is a C-shaped light steel components, the wall thickness according to the load, Light Steel Villa usually 0.84 ~ 2 mm, the column spacing is generally 400 to 600 mm , Light steel villas This wall structure arrangement, Light Steel Villa can effectively bear and reliable transmission of vertical load, and easy to arrange.

Building Energy Saving and Energy Saving Technology of Light Steel Villa

Light steel villas In order to ensure the effect of insulation, Light Steel Villa insulation and insulation materials used in the external walls and roofs of buildings can be used for a long time and can be insulated. Light steel villa in addition to the walls of the wall in addition to filling glass fiber, the wall and then paste a layer of insulation material, effectively cut off the wall through the wall to the outer wall of the bridge; between the joists filled with glass fiber, Reduce the heat transfer through the floor; Light Steel Villa all wall wall between the wall are filled with glass fiber, reducing the heat transfer between the wall.

Pai Le Si light steel villa one of the most critical issue is the application of fire technology, light steel villa fire rating for the four. Light steel villa on both sides of the wall with the floor of the ceiling attached to the fire gypsum board, for the ordinary firewall and wall with 25.4 mm thick (1 inch) gypsum board protection to achieve 1 hour fire protection requirements, Light Steel Villa The glass fiber filled with the walls between the walls and the floor of the floor also has a positive protection against fire and heat transfer.

Light steel villas are filled with glass wool between the inner and outer walls and the floor joists to effectively block the air through the air, and for the impact of solid propagation, Light Steel Villa the following construction is made: With the middle of the gap between the two walls; Light Steel Villa and for the ceiling with a fixed gypsum board keel, with a small slot with the elastic structure to effectively reduce the solid sound between the floor.